To locate the BIOS version number, go to the web browser of the system. Open the manufacturer’s BIOS support website. From the manufacturer’s BIOS support website, choose the correct BIOS version for your system. In this step, you require to locate the number of the BIOS version to move further.
Replacing Your Bios Logo
My computer has a 2.4 ghz Intel Core 2 Quad Q6600 processor with 4 gig of ram and I’m running a 64 bit win 7. At last, complete the updating process of the BIOS. Before proceeding further, ensure that your system is plugged in with a strong power outlet. This downloading process may take some time to finish. Therefore, you require to wait until the entire downloading process completes.
Uncheck all except Microsoft and your antivirus program. Check again you used the correct BIOS for your board model AND version. The version of AFUDOS.EXE must also be compatible with using it with the navigate here bios flash chip model the mboard has, and the bios update. If you use it in Windows, it must be the correct version – 32 bit (a.k.a. x86) or 64 bit – whatever your operating system is. If you moved a jumper on the mboard to clear the cmos, you must move it back to it’s original position.
Go to the Start menu of the system and tap on it to open. At last, try to save the changes that you have made and close the BIOS window. After completing all the above-stated steps, turn off the system and turn on it again.
- Might start looking into enviromental differences in the room, that might be effecting these 2 machines.
- you replaced the battery so this isn`t a problem anymore.
- 1) If possible, please try testing with other memory modules.
- If for some reason your mainboard has a hot-spot, excessive temperatures for the CMOS chip can cause it’s contents to scramble.
- Make sure you have a keyboard that’s hardwired (not wireless) and hold down del and F1 to get to bios setup.
Not The Answer You’re Looking For? Browse Other Questions Tagged Motherboard Battery Cmos Or Ask Your Own Question.
If it’s installed backwards, or if the contact on the + side is not touching it, the bios behaves as if it’s dead or not there. – usually it must be installed so the the + marking shows on the top (horizontal battery socket) or the side (vertical battery socket) when it’s installed . That does not include problems caused by you installing incompatible ram or changing which ram you have installed, which is another subject. I have spent so much time trying to get it right but not getting anywhere fast so any tips or suggestions would be greatly welcomed.
After that, check the system to see that the issue is resolved or not. In case, the issue still continues and avert you to use the system hassle-free, then enter the BIOS again. Now, follow the entire details of the key usage. After that, choose the option “Load Defaults”.